E u g e n e , O r e g o n
541-729-8458 info @ eugenehifi.com
|
||||||||||||||||
|
||||||||||||||||
 |
 |
Rega
- Solar - Operates all remote controlled Rega products, including the previous Rega range. |
Price $95 |
||||
 |
Rega
- Turntable Wall Bracket Allows for a wall-mounted turntable setup. |
Price $180 |
||||
 |
Rega
- R1 Wall Bracket R1 loudspeakers can also be wall mounted using these wall brackets. The wall bracket is easy to fit and is supplied with all the fixing screws and parts needed. |
Price $55 |
||||
 |
Rega
- Ear The new Ear Headphone Amplifier benefits from an all new extruded aluminium case and new styling giving it more of a family feel to match its illustrious big brothers. The Ear simply connects to the tape output of an amplifier via phono leads, the headphones are plugged into the front panel and there is a link socket incase you need your tape output sockets for other use. The new Ear is also available in our new alloy finish. |
Price $295 |
||||
 |
Rega
- Fono The Rega Fono is a high quality discrete component phono preamplifier. Two types are available for use with either MM or MC cartridges. The Fono simply connects to the line input on the amplifier, and the tonearm leads and earth (if used) to the input socket and earth terminal of the Fono back panel. |
Price MM - $330 MC - $450 |
||||
 |
Rega
- VTA Spacers As some manufacturers use deeper bodied cartridges than our own, it may be necessary to add our "Rega Arm Spacers" to obtain correct VTA. 2mm, 4mm and 10mm sizes are available and a sleeved arm nut is supplied for use with 4mm and above. The new adjustable tonearm spacer has settings for 2mm, 4mm, 6mm and 8mm. |
Price 2.0 mm - $15 4.0 mm - $15 10.0 mm - $19 arm nut spacer - $12 2 mm for RB700 - $39 adjustable -$29 |
||||
 |
Rega
- Planer 2 / Planar 3 Upgrade Kit The new P3 motor upgrade uses no active electronic trimming devices and combines remarkable cost-effective engineering producing extremely low vibration. This has enabled us to re-design one of the most classic features of the original Planar design. As our new motor assembly has virtually no vibration, It can be directly coupled to the turntable plinth using the latest in adhesive pad technology commonly found in the automotive and aerospace Industry. |
Price Planar 2 Motor - $165 Planar 3 Motor - $175 |
||||
 |
Rega
- TT PSU The all new TT PSU and motor anti-vibration circuit is a combination of the innovative P9 power supply. It also has an improved P25 anti-vibration motor drive feeding the P9 24V AC synchronous motor. Available as an upgrade for the P3-24 & P5. Comes stock on the P7. |
Price $375 |
||||