| |
|
|
|
|
|
Origin
Live Upgrades for the Rega RB250/251 Tonearm |
|
Call For Prices
|
|
|
 |
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Structural Upgrade
- The work involves removing the existing rear end counterweight
stub
(which is normally just screwed into the end of the Rega
arm - a sonic disaster), and replacing it
with a new stub, torqued onto the arm by a thin high tensile
bolt. A far more significant upgrade than
rewiring the tonearm.
- Slotted Arm Tube - This upgrade
involves removing the powder coat from the arm tube which
enables faster energy transmission and prevents the arm
being over damped. A slot is then
machined in the underside of the arm to reduce ringing effects.
Lastly the arm tube is highly polished
giving it a very high grade appearance. Please note that
Origin Live internal rewiring must be already
included in your arm or ordered for this upgrade to be possible.
- Internal Rewire - High grade
Litz wire is used inside the arm tube. The Litz is to Origin
Live’s
specification and design. An internal dedicated earth lead
is attached at the head shell and runs
through to your amplifier). The old cartridge tags are replaced
with gold plated, copper beryllium
versions. The headshell wires are upgraded with robust,
silver plated, PTFE insulated wire.
- External Rewire - A special
low resistance cable, optimized for low level signals, replaces
the
existing cable
- High Grade aluminum phono plugs
- Standard brass phono plugs are replaced with high
conductivity aluminum ones – Over twice as conductive
as brass.
|
|
|
|
|
